Posts

Showing posts with the label Material Science

Transformer me ferromagnetic material kyu use karte hai?

Image
Transformer mein ferromagnetic materials ka use kyun kiya jata hai? Ferromagnetic materials ka use transformer mein mainly unke high magnetic permeability ki wajah se kiya jata hai. High magnetic permeability ka matlab hai ki ye materials magnetic flux ko apne andar se easily pass hone dete hain. Isse kya fayda hota hai?   Zyada magnetic flux: High permeability ki wajah se, transformer mein zyada magnetic flux hota hai, jisse transformer ki efficiency badhti hai. Less core loss: Isse transformer ke core mein kam heat loss hota hai, jisse transformer ki efficiency aur life badhti hai. Small core size: Zyada magnetic flux ko handle karne ke liye, core ko bada nahi banana padta, jisse transformer ka size aur weight kam ho jata hai. Iske alawa, ferromagnetic materials ki aur bhi kuch properties hoti hain jo unhe transformer ke liye suitable banati hain. High saturation point: Ye materials high magnetic field mein bhi apni magnetic properties ko retain rakhte hain, jisse tra...

ALL ABOUT B-H RELATIONSHIP (MAGNETIZATION CHARACTERISTIC)

Image
In free space (also nonmagnetic materials), the permeability m0 is constant so that B-H relationship is linear. This, however, is not the case with ferromagnetic materials used in electric machines, wherein the B-H relationship is strictly nonlinear in two respects— saturation and hysteresis. Hysteresis non-linearity is the double valued B-H relationship exhibited in cyclic variation of H (i.e. exciting current). This nonlinearity is usually ignored in magnetic circuit calculations and is important only when current wave shape and power loss are to be accounted for. This is discussed in Sections 2.3 and 2.6. A typical normal B-H relationship (magnetization characteristic) for ferromagnetic materials is shown It has an initial nonlinear zone, a middle almost linear zone and a final saturation zone in which B progressively increases less rapidly with H compared to the linear zone. In the deep saturation zone, the material behaves like free space. Due to considerati...

MAGNETIC CIRCUIT AND INDUCTION

Image
1. Magnetic Circuit Calculations: Normally magnetic circuit calculations involve two types of problems. In the first type of problem it is required to determine the excitation (mmf ) needed to establish a desired flux or flux density at a given point in a magnetic circuit. This is the normal case in designing electromechanical devices and is a straight forward problem. In the second category, the flux (or flux density) is unknown and is required to be determined for a given geometry of the magnetic circuit and specified mmf. This kind of problem arises in magnetic amplifiers wherein this resultant flux is required to be determined owing to the given excitation on one or more control windings. A little thought will reveal that there is no direct analytical solution to this problem because of the non-linear B-H characteristic of the magnetic material. Graphical/numerical techniques have to be used in obtaining the solution of this problem. 2. Leakage Flux: In all practica...